What we provide

All calibrations are traceable to the National Institute of Standards and Technology (NIST), formerly known as NBS or the National Bureau of Standards. We are a full ISO Guide 25 (ISO 17025) accredited lab and each returned instrument will include: 1) Certification of Calibration, 2) Recall Notification, 3) Out of Tolerance Notification, and 4) Calibration Void Seals as needed. We inspect and clean your instrument upon receipt, provide estimates for repairs (evaluation fees may apply depending on the complexity of the repair required) and will furnish you the before and after data readings upon request.

We offer 5 business day turnaround on most calibrations and 10 business day turnarounds on instruments that need environmental stabilization.

Electronic Calibration

Our electronic lab has an extended range of capabilities. As always, we offer fair pricing and superior quality.

Frequency Counters
Multimeters
LCR Meters
Spectrum Analyzers
Network Analyzers
PH Meters
HiPot Testers
Decade Resistors
Meggers
Digital/Analog Oscilloscopes
Decade Capacitors
Signal Generators
Digital Thermometers
IR Thermometers
Liquid in Glass Thermometers
Clamp-on Amp Meters
Current Shunts
Much much more...

Pressure Calibration

We calibrate Deadweight Testers, Pressure Gauges, Pressure Transducers and Vacuum Gauges from such widely known manufacturers as Druck, Ametek, Heise, Transmation, Fluke, Wallace & Tiernan and others to numerous to list here.

The DH Primary Piston Gage tester has an accuracy of +/-0.005% of applied pressure and +/- 5 PPM repeatability on pressure

Precise Vacuum measurements are made using the Hass A-1, Mercury Barometer with a Welch Ruffing Pump and a Varian Diffusion Vacuum System.

Physical-Dimensional Calibration

Our 68 Degree Cold Laboratory allows us to offer NIST traceable certifications for Micrometers, Calipers, Thread Plugs, Thread Ring Gauges, Plain Plugs, Plain Ring Gages, Pin Gages, Height Masters, Parallels and Surface Plates.

Internal Measurements:
With the Federal Internal Comparator, precise internal measurements can be achieved with minimal uncertainty. All rings are dip sealed after certificaton to protect the measurement surface.

Optical Comparator Certifications:
We offer quick response, competitive pricing and outstanding quality on all of our Optical Comparator Certifications.

Gauge Block Comparator:
Our Federal Gauge Block Comparator can measure 0 to 4 inches with a calculated uncertainty to 0.000001 inch.

Surface Plate Certifications:
We use the Federal Electronic Level System with the Starrett Repeat Reading Gauge as a primary standard for certification of surface plates. Diamond dust dry lapping provides rapid and clean repair of Out-of-Tolerance surface plates.

Torque Instrument Certifications:
With capabilities from 1in oz to 2000ft lbs., we can certify all of your torque instruments.

Environmental Testing Calibrations / Temperature Calibration

With our Lunaire Environmental Test Chamber, we offer full temperature and humidity calibrations with some of the strictist controls on the market.

(-60 degrees C - 180 degrees C)

Temperature Calibration

Weight set Calibration

We can calibrate your weight sets ranging from 0-10 kilograms.
Class F to Class S-1 sets.

→ Contact us for additional information regarding this service

On-Site Calibration Services

When production demands do not allow for a work stoppage, Upstate Metrology's Mobile Calibration Unit can provide on-site calibration services at your facility. This premium calibration service reduces production loss and eliminates the need to track equipment into and out of your facility. Your equipment is calibrated quickly and correctly at your facility by our trained professional staff.

→ Request a Pick-Up or Delivery of your equipment
→ Fill out On-Site Service Survey